Page 1 of 1
QTCat skin (Like as QTVR cut btn. bar)
Posted: Sun Mar 23, 2008 6:28 pm
by hum@no.id
For full visual synchronizing your projectors for two formats QTVR/Flash.
http://www.almatycity.com/files/qtcat.zip
*original file - qtcat.ggsk
*it's recommended only for 'With Window' scaling mode (Flash out)
humanoid:)
NeoLite for DevalVR like as QTCat for Pano2VR
Posted: Wed Apr 02, 2008 4:39 pm
by hum@no.id
It's made alike for DevalVR Player.
For your site in united design controllers - QTVR / Pano2VR (Flash out) / DevalVR player
DevalVR Controller Presets
http://www.almatycity.com/files/NeoLite3.zip
how to use - include *.mov name into dvl file
Re: QTCat skin (Like as QTVR cut btn. bar)
Posted: Tue Apr 08, 2008 9:47 am
by hum@no.id
I'm just make new "Info btn". For any adding information - About us, Help etc.
but apart... necessary to install this itself, if need...
3 button condition - normal, overmouse, press
http://www.almatycity.com/files/info_qtcat_pano2vr.zip
Re: QTCat skin (Like as QTVR cut btn. bar)
Posted: Tue Apr 29, 2014 11:22 am
by Hopki
HI Gumir,
Im being lazy
, did you ever make the show Hotspots button to go with the QTVR Skin?
I find Im using it more and more.
The info will work but the original button image has a house drawn around it.
If not don't worry Im sure Ill get around to it one day.
Regards,
Hopki
Re: QTCat skin (Like as QTVR cut btn. bar)
Posted: Tue Apr 29, 2014 5:29 pm
by 360Texas
Probably OFF TOPIC but worth mentioning here because the toolbar shown would not be practical for small devices.
While creating HTML5/Flash buttons I learned that some smart phone people have FAT fingers !
Controller buttons should be sized large, spaced far enough apart and positioned to permit practical finger touch usage on smart phones, tablets and desktop screens.
Logically a controller might be configured for the smallest screen and anchored to the lower left corner of the "Portrait" oriented screen.
I found that the normal 7 button [ -, +, up, down, left, right, and full screen] controller buttons might be reduced by removing the up/down, and left/right because touch screens have those gesture functions.
Re: QTCat skin (Like as QTVR cut btn. bar)
Posted: Wed Apr 30, 2014 5:00 pm
by jare
I don't see any reason today to include a left/right/up/down buttons to panorama's toolbar. Have someone of you used them ever? Me not. Unless testing if they're working
Re: QTCat skin (Like as QTVR cut btn. bar)
Posted: Wed Apr 30, 2014 10:01 pm
by JimWatters
I never use the arrow keys. I started adding zoom in and out again when I got my first Smart phone and discovered Flash on Android did not allow pinch to zoom. It also comes in hand now that Firefox Build 28 broke scroll wheel zoom on the desktop.
Re: QTCat skin (Like as QTVR cut btn. bar)
Posted: Wed Apr 30, 2014 11:40 pm
by Hopki
I agree I don't think I'v used the u, d, l, r buttons in a skin even through they are there for a panorama, but for an object...
With auto move mode when zoomed you need the buttons to change columns and rows while the mouse or finger moves the image around the screen.
Regards,
Hopki