Page 1 of 1
Optimum Output Size
Posted: Tue Jan 20, 2009 1:56 pm
by immersivepix
Is there an optimum output size for the final images that will display clearly on computer screens but also download quickly? Is there any advantage in resizing the input images or does Pano2vr do all this? Does Pano2vr also compress the images?
Peter
Re: Optimum Output Size
Posted: Fri Jan 23, 2009 1:29 pm
by zap
Input: 6000x2000 Equirectangular image
Cubesize: 6000/4 = 1500
Nadir/Zenith settings = 40% jpg quality
All the other shots 90%
Gives a flash file for about 1.6MB
Reasonable to open and download.
Cheers
Re: Optimum Output Size
Posted: Fri Jan 23, 2009 1:36 pm
by hum@no.id
Cubesize: 6000/4 = 1200
6000x3000 (sphere) remapping to cube - 1/4+20% =
1800px Cube face (6000px /4 + 300px)
Re: Optimum Output Size
Posted: Tue Feb 17, 2009 4:50 am
by immersivepix
Thanks.
Which has the greatest effect on final quality and size, the initial image size, format or the flash settings. I presume that pano2vr change the input image to fit your flash settings. Also I would like to have a size around 500kb so that it is accessible to viewers that have slower internet connections (like me)
Cheers
Peter
Re: Optimum Output Size
Posted: Tue Feb 17, 2009 10:15 am
by hum@no.id
Also I would like to have a size around 500kb so that it is accessible to viewers that have slower internet connections (like me)
approx. settigns
Projection frame - 600x350 px
Cube face - 900 px
JPEG quality - 60 %
*not fullsreen mode
Re: Optimum Output Size
Posted: Tue Feb 24, 2009 12:25 pm
by zap
hum@no.id wrote:Cubesize: 6000/4 = 1200
6000x3000 (sphere) remapping to cube - 1/4+20% =
1800px Cube face (6000px /4 + 300px)
Thanks I modified this
Why do you use 20% + ? You have tested it out?