Viewing Parameters (Pano2VR)
From Garden Gnome Software
Modifying the viewing parameters will let you set where, within the image, the movie will begin. You can also set the limits of field of view and viewing range.
Contents |
Introductory Video
This video shows you how to modify the viewing parameters.
Viewing Parameter/Limits
Set the default view by moving the image on the right side of the viewing parameter panel and then click Set. Don't like what you have chosen? No problem, just click Reset. Lost your spot? Not sure what you have set the default view to? No problem, just click, Go To.
Pan: The horizontal limit
Tilt: The vertical limit
FoV: The depth limit (zoom)
Cylindrical Panorama (Available only when the input image is a cylinder)
Horizontal FoV: Adjust the degree of the horizontal field of view.
Viewing Limits
These parameters can limit the viewing area of the movie; how far a user can move the movie upwards, downwards, left and right.
Show Limits: Check this box to limit how far right, left, up or down the image can move. Use the input boxes to enter values or move the movie to the limit and click set at the corresponding side to save the limit's position.
Ignore Limits in Preview: The limits that have been set here will not be applied to the preview movie within this preview window.
Reset Limits: Click this to reset the viewing limit values to their defaults.
Field of View (Zoom)
Set the zooming limits of the movie; how far the user can zoom into the image or zoom out, hence narrowing or widening the field of view.
- HINT: use the scroll wheel on the mouse to zoom.
Minimum: Zoom in as far as preferred and click set to apply the setting.
Maximum: Zoom out as far as preferred and click set to apply the setting.
Reset Limits: Click this to reset the viewing limits values to their defaults.